FreeBSD 11.0-CURRENT/clang on Raspberry Pi 512MB (with U-Boot 14.10 + ubldr)

10-CURRENT files are moved to "old10", 11-CURRENT old files are moved to "old" directory.
If you want it, please find in old or old10.

If you want HS mode, add the following line to /boot/loader.conf:
hw.bcm2835.sdhci.hs=1

Using local packages:
1. First install pkg by pkg-static.
    # fetch http://www.peach.ne.jp/archives/rpi/pkg-static
    # chmod 755 pkg-static
    # ./pkg-static add http://www.peach.ne.jp/archives/rpi/ports/pkg.txz

2. Disable default repo by FreeBSD.conf.
    # mkdir -p /usr/local/etc/pkg/repos
    # echo "FreeBSD: { enabled: no }" > /usr/local/etc/pkg/repos/FreeBSD.conf

3. Install following rpi.conf:
    # fetch http://www.peach.ne.jp/archives/rpi/rpi.conf
    # mv rpi.conf /usr/local/etc/pkg/repos
    # pkg update

CPU frequency controlled by cpufeq(4):
You can change clock by hand (dev.cpu.0.freq) or powerd.
Also realtime raw values are stored in hw.cpufreq.

For additional information, please see Japanese blog at:
http://shell.peach.ne.jp/aoyama/archives/2931

Thank you.
Daisuke Aoyama